Error while programming PSoC1 with windows10-64 bit system

Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
ShR_298411
Level 1
Level 1

Hi

I had upgraded my system from Win10-32 bits to Win10-64 bits. I had absolutely no problems in the 32 bit machine except the SVG file display issue that I ignored.

A month ago I had an issue regarding the build of the PSoC1 software, refer(

that was corrected by removing the spaces in directory names.

Now my issue is that I get an error - sometimes, not always - when I try to program using a Miniprog ver 1.8
The error is

Failed to initialize PSoC3 ES0-2 operations

FAILED! Failed to initialize PSoC3 ES0-2 operations

I do not have anything with PSoC3. How do I remove this error. It takes place while verifying.

This with the built in programmer s/w in PSoCDesigner-5.4 build 3191

I tried using the programmer s/w separately (PSoC Programmer  3.28.5.4358)

There too, I get an error while verifying.

Please advise.

0 Likes
1 Solution

Hello Shivakumar,

PSoC Programmer + MiniProg1 + Windows 10 + PSoc Designer have not been validated. It is best to try to

- Mark the PSoC Programmer / PSoC Designer executables as WinXP mode

- Work on a 32-bits Windows 10 machine

- Try a different version of PSoC Programmer.

Best regards,

Sampath Selvaraj

View solution in original post

0 Likes
4 Replies
SampathS_11
Moderator
Moderator
Moderator
250 sign-ins 250 solutions authored 5 questions asked

Hello Shivakumar,

Kindly attach the screenshot and the log of the error.

Best regards,

Sampath Selvaraj

0 Likes

Hello Sampath

Thank you for responding.

I tried again, four times today, twice in PSoC Programmer standalone s/w, and twice within Designer. This time it worked thrice without error, and once gave the same error from the programmer within Designer.

This is the screenshot

pastedImage_0.png

Please advise.

Thanks

Shiv

0 Likes

Hello Shivakumar,

Can you kindly install the latest version of PSoC Programmer, and check if this error appears?

What is the version of PSoC Programmer, in which you are seeing this error?

Thanks, and regards,

Sampath Selvaraj

0 Likes

Hello Shivakumar,

PSoC Programmer + MiniProg1 + Windows 10 + PSoc Designer have not been validated. It is best to try to

- Mark the PSoC Programmer / PSoC Designer executables as WinXP mode

- Work on a 32-bits Windows 10 machine

- Try a different version of PSoC Programmer.

Best regards,

Sampath Selvaraj

0 Likes