- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi Cypress team,
Recently we want to use the 89820 on Automotive project.
Almost end customer wants to use the IAR.
The previous question is below:
Could Modustoolbox support the IAR tool chain?
I modified the make file but we could not build the reference application. (currently, I'm using the hello client application)
Below is the error message
=========================
Compiling hello_client.c -DWICED_BT_TRACE_ENABLE ......
Command line error: Unable to open the command file "freestanding"
make: *** [../../../wiced_btsdk/dev-kit/baselib/20820A1/make/core/build.mk:379: C:/Users/wayne/mtw2/BLE_989820EVB01/ble/hello_client/build/CYW989820EVB-01/Debug/hello_client.o] Error 2
I've changed the makefile in hello client project.
==============================
TOOLCHAIN=IAR
And also changed the "IAR.mk"
==============================
CY_CROSSPATH="C:/Program Files (x86)/IAR Systems/Embedded Workbench 8.4/arm/bin"
What is the "freestanding"? Is there anything to build with the IAR compiler?
Regards,
Wayne
Solved! Go to Solution.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello Wayne,
As per the internal discussion , we are not supporting IAR tool chain for 89820.
Regards,
Anjana
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello Wayne,
As per the internal discussion , we are not supporting IAR tool chain for 89820.
Regards,
Anjana