- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi Cypress member,
I was asked about how do we modified CCA/ED configuration by our customer.
In Nvram file for Murata Type1MW(CYW43455), the following two items are written.
ed_thresh2g=-65
ed_thresh5g=-65
Can we modified them and what can we see as a result?
Best regards,
Shohei.
Solved! Go to Solution.
- Labels:
-
WICED Studio
-
Wifi+Bluetooth
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
For dual band radios, you can consider using the following values for energy detect to pass adaptivity if using production firmware:
ed_thresh2g=-70
ed_thresh5g=-73
Alternately, if you are using mfgtest firmware, you can manually set the threshold level using wl phy_ed_thresh X where X is between 0 to -75.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
For dual band radios, you can consider using the following values for energy detect to pass adaptivity if using production firmware:
ed_thresh2g=-70
ed_thresh5g=-73
Alternately, if you are using mfgtest firmware, you can manually set the threshold level using wl phy_ed_thresh X where X is between 0 to -75.