- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi all
Recently, i try to plant wiced6.4 ble firmeware use chip CYW43438A1,and used only low_energy mode not dual_mode,when i plant success and try to test it,CYW43438A1operates as a central and connects to a peripheralfind, it can not connected to CYW20706A1,when connected it auto disconnected rapidly,the disconnect reason is :0x16,also the MTU didn't get;
but when I use mobile phone or chip CYW20736 it connect ok and communicat well.
the connect api set as :
wiced_bt_gatt_le_connect (conn_param->bd_addr.mac_addr,
ble_mac_type,
BLE_CONN_MODE_HIGH_DUTY,
TRUE);
the other connect paprmeter set as:.security_requirement_mask = BTM_SEC_NONE,
.conn_min_interval = 24
.conn_max_interval =40
.conn_latency = 0
.conn_supervision_timeout = 700,
thanks!!!
MichaelF_56broadcomwiced-admin
Solved! Go to Solution.
- Labels:
-
WICED Studio
-
Wifi+Bluetooth
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I already try the connection between the 43438 client with 6.4 version and 20706A2 , the status is normal.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
some questions about the issue:
1. if the version before 6.4 is ok for the connection.
2. you mean you are using a lower Wiced version , right ?
merge wiced6.4 ble firmeware use chip CYW43438A1
if appropriate , Could you please share the files you already merge ?
I will have a test based on 6.4 .
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
some replay:
1. the version before 6.4 connection status is ok.
2. I means I try to plant the wiced6.4 to current environment with ble firmeware for CYW43438A1.plant file from:WICED-Studio- 6.4\43xxx_Wi-Fi\libraries\drivers\bluetooth .major used file is :43xxx_Wi-Fi\libraries\drivers\bluetooth\low_energy firmeware and BTE.
and bluetooth_low_energy.FreeRTOS.LwIP.ARM_CM4.release.a. It seems run ok and can connect to mobile phone and cyw20736.so may you can try to connect with CYW20706A1 and CYW20706A2. we set the BT_CHIP_XTAL_FREQUENCY := 37_4MHz
3. the merge file run on our tools with protocol,may be can not control dierectly.
thanks for your support!
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I already try the connection between the 43438 client with 6.4 version and 20706A2 , the status is normal.