FX3 connected to Lupa300 image sensor

Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
ToWo_4256761
Level 1
Level 1

Hello,

is there any available information available i.e. schematics or programming guides for using a Lupa300 and the FX3?

On semi has only limited information available.

Thanks for any help.

0 Likes
1 Solution
YashwantK_46
Moderator
Moderator
Moderator
100 solutions authored 50 solutions authored 50 likes received

Hello,


Please refer to the following appnote: https://www.cypress.com/documentation/application-notes/an75779-how-implement-image-sensor-interface...

You will have to modify the sensor.c file in the AN75779.zip folder to the sensor setting of lupa300 to be able to configure it and stream video using the sensor.

You can go through the appnote to get an understanding about the process of programming the image sensor.


Regards,

Yashwant

View solution in original post

0 Likes
1 Reply
YashwantK_46
Moderator
Moderator
Moderator
100 solutions authored 50 solutions authored 50 likes received

Hello,


Please refer to the following appnote: https://www.cypress.com/documentation/application-notes/an75779-how-implement-image-sensor-interface...

You will have to modify the sensor.c file in the AN75779.zip folder to the sensor setting of lupa300 to be able to configure it and stream video using the sensor.

You can go through the appnote to get an understanding about the process of programming the image sensor.


Regards,

Yashwant

0 Likes