- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I have just acquired a CY8CPROTO-062-4343W kit and downloaded Modus Toolbox 2.0 (and rebooted my system several times since then).. I am running WIndows 10.
I have tried following along with the videos Modus Toolbox 101 Lessons 1-1, 1-2, 2-1 and 2-2.
The screens are somewhat different- I attribute that to a difference between 2.0 and earlier versions.
One of the problems is there is no "Blinky" application in the list. So I thought I would try the "Hello World" application. It results in 2 errors which you can see below- however if they are illegible in the picture they read:
Error creating Eclipse launch configurations: Makefile:162: *** Unable to find any of the available CY_TOOLS_PATHS -- . Stop.
Unable to find configurator information: Makefile:162: *** Unable to find any of the available CY_TOOLS_PATHS -- . Stop.
And there are few of the files that I expected to see based on the videos including the ability to look at the configuration
Based on my earlier work with Eclipse and Android, I am wondering if I need to add entries to my parh.
Anybody have any clue as to what to do.
Solved! Go to Solution.
- Labels:
-
ispn:40047:1:0
-
l1:314:1:0
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Yes the videos are for ModusToolbox 1.1. Though the application code remains mostly the same , the flow in ModusToolbox 2.0 is slightly different. Please refer to the following documents on ModusToolbox 2.0 to get you started:
When you were installing ModusToolbox, did you change the default folder name "ModusToolbox" to something else? Please note that when you create the application it tries to locate the "tools_2.0" folder present in the installation directory. If you installed ModusToolbox to a custom location, please add the path in "CY_TOOLS_PATHS+=" as shown below:
Or if you changed the name of the default folder to "ModusToolbox_20" for example, then just change the name in the "CY_TOOLS_PATHS ?=" to "$(CY_WIN_HOME)/ModusToolbox_20/tools_* \"
Let me know if this solves your issue.
Regards,
Dheeraj
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Yes the videos are for ModusToolbox 1.1. Though the application code remains mostly the same , the flow in ModusToolbox 2.0 is slightly different. Please refer to the following documents on ModusToolbox 2.0 to get you started:
When you were installing ModusToolbox, did you change the default folder name "ModusToolbox" to something else? Please note that when you create the application it tries to locate the "tools_2.0" folder present in the installation directory. If you installed ModusToolbox to a custom location, please add the path in "CY_TOOLS_PATHS+=" as shown below:
Or if you changed the name of the default folder to "ModusToolbox_20" for example, then just change the name in the "CY_TOOLS_PATHS ?=" to "$(CY_WIN_HOME)/ModusToolbox_20/tools_* \"
Let me know if this solves your issue.
Regards,
Dheeraj
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Thank you.