- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
I am trying to establish a serial connection between either a computer (Windows 10) or between two CyBLE-013025-00 modules. I have gone through the cable replacement example (section 3.2 of the document "EZ-Serial WICED BLE Firmware Platform User Guide",https://www.cypress.com/file/408286/download ), in fact there is no example, only showing the messages during the connection process. I connected the module to a PC (Windows 10) and the device immediately get disconnected with a reason 0x913, see the messages below:
I was expecting something like a new comport, but nothing happens. The device manager shows a new bluetooth device.
Is there any program to send data over this?
For connecting between two CyBLE-013025-00 modules, the document advises to use WICED SMART to develop a program, but no further information.
Solved! Go to Solution.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi Niras,
First of all, please note EZ-Serial WICED BLE Firmware won't support BLE Central , it will only support peripheral role.
If you want to use CyBLE-013025-00 module at both sides, its better to use custom application developed with WICED SMART SDK .
I would suggest you to sue hello_sensor (which is BLE peripheral ) and hello_client (which is BLE central) examples as reference.
Please test it and analyze.
Thanks,
Anjana
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello Niras,
CyBLE-013025-00 is a BLE device. Hope you know the BLE basics.
For sending data between two devices in BLE, you may have to use the BLE characteristics properties like read / write / notify.
So either you can use any of these properties by sending read / write / notify commands in https://www.cypress.com/file/408286/download
or you can develop a WICED SMART SDK project . For example refer hello_sensor , hello_client projects in WICED SMART SDK
Regards,
Anjana
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
Thank you for the reply,
Did you mean to follow the sections 3.3/3.4? But how to access these GATT Server data from PC? using the built in bluetooth module.
For the EZ Serial in CySPP mode, what is the easiest way to make a CySPP central device (prefer to use PC or same kind of device)? And any example?
Regards
Niras
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi Niras,
Can you please describe the application ?
So that we can suggest you appropriately.
Regards,
Anjana
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
I need to send 200 bytes of data from PC (maybe via a dongle/usb adapter) in every 30m sec, mostly one direction.
Regards
Niras
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi Niras,
First of all, please note EZ-Serial WICED BLE Firmware won't support BLE Central , it will only support peripheral role.
If you want to use CyBLE-013025-00 module at both sides, its better to use custom application developed with WICED SMART SDK .
I would suggest you to sue hello_sensor (which is BLE peripheral ) and hello_client (which is BLE central) examples as reference.
Please test it and analyze.
Thanks,
Anjana