- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
We think about using the touch controller “CY8CMBR3102-SX1IT” as an standby button for our product. I tested the touch button with the evaluation board and it performs very good.
Now I am wondering if the touch controller has enough immunity versus environmental factors(EMC).
Do you have practical experiences with the touch used in other projects as standby button? Are there any test results with IEC/EN 61000-4-6 (10V rms)?
best regards
Solved! Go to Solution.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
Unfortunately we do not have test results for IEC/EN 61000-4-6 (10V rms).
But we if the design guidelines are strictly adhered to, we believe that you will be able to pass this test.
For more information please refer to the MBR3 CapSense design guide.
https://www.cypress.com/documentation/application-notes/an90071-cy8cmbr3xxx-capsense-design-guide
Regards,
Bragadeesh
Bragadeesh
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi AnHi_4375051,
We are checking with our product team to see if we have any test results that you have requested for.
Our MBR3 touch controllers has good immunity(EMC) and provides robust operation under extreme noise conditions.
CY8CMBR3102 device has a EMC feature that provides advanced noise immunity algorithm for superior noise immunity against external radiated and conducted noise.
Regards,
Bragadeesh
Bragadeesh
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
Unfortunately we do not have test results for IEC/EN 61000-4-6 (10V rms).
But we if the design guidelines are strictly adhered to, we believe that you will be able to pass this test.
For more information please refer to the MBR3 CapSense design guide.
https://www.cypress.com/documentation/application-notes/an90071-cy8cmbr3xxx-capsense-design-guide
Regards,
Bragadeesh
Bragadeesh
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi Bragadeesh
Thank you for the information. I will check design guide.
Best regards,
Andres Hitz
Andres Hitz
Elektroingenieur FH
Andres.hitz@comtac.ch<mailto:Andres.hitz@comtac.ch>
T direkt: +41 52 647 30 37
comtac AG
Allenwindenstrasse 1
CH-8247 Flurlingen
T +41 52 647 30 30
www.comtac.ch<http://www.comtac.ch/>
Von: BragadeeshV_41 <community-manager@cypress.com>
Gesendet: Freitag, 25. Oktober 2019 16:25
An: Andres Hitz <andres.hitz@comtac.ch>
Betreff: Re: - Touch controller as standby button
<https://eur03.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.cypress.com&data=02%7C01%7Candres.hitz%40comtac.ch%7C7729b5497c69481ba2ff08d759572947%7Ced7f4ea110ef40389be606a18f09445d%7C0%7C0%7C637076103200360890&sdata=aDTLbDv4t99QBF6tcNUFRpEOSuT%2FGYewIbvdbPHYYhw%3D&reserved=0>
Cypress Developer Community <https://eur03.safelinks.protection.outlook.com/?url=https%3A%2F%2Fcommunity.cypress.com%2F%3Fet%3Dwatches.email.thread&data=02%7C01%7Candres.hitz%40comtac.ch%7C7729b5497c69481ba2ff08d759572947%7Ced7f4ea110ef40389be606a18f09445d%7C0%7C0%7C637076103200360890&sdata=ncf2nfHsC1YQGO1zvEakerbjGFl%2FqdHIRh5Gg6aMODc%3D&reserved=0>
Touch controller as standby button
reply from BragadeeshV_41<https://eur03.safelinks.protection.outlook.com/?url=https%3A%2F%2Fcommunity.cypress.com%2Fpeople%2FBragadeeshV_41%3Fet%3Dwatches.email.thread&data=02%7C01%7Candres.hitz%40comtac.ch%7C7729b5497c69481ba2ff08d759572947%7Ced7f4ea110ef40389be606a18f09445d%7C0%7C0%7C637076103200370887&sdata=S6lOl%2FmqxoWqe0skpkafpcoL5VTerLfod3y1vNsVJJY%3D&reserved=0> in PSoC 4 MCU Community - View the full discussion<https://eur03.safelinks.protection.outlook.com/?url=https%3A%2F%2Fcommunity.cypress.com%2Fmessage%2F213259%3Fet%3Dwatches.email.thread%23213259&data=02%7C01%7Candres.hitz%40comtac.ch%7C7729b5497c69481ba2ff08d759572947%7Ced7f4ea110ef40389be606a18f09445d%7C0%7C0%7C637076103200370887&sdata=WXPHJDTCBikrt9wsUk01LJcBvBYVqodrKcBSSxR9TRo%3D&reserved=0>