CYPD4236 PR_SWAP with MAC BOOK(2016-2017)

Announcements

Live Webinar: USB-C adoption. Simple & Cost-efficient solutions | April 18th @9am or 5pm CEST. Register now !

Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
lock attach
Attachments are accessible only for community members.
falu_294486
Level 3
Level 3
10 replies posted 5 replies posted Welcome!

Hi,

I design a type c port test card, when i try to pr_swap with mac book, it can not be success.

(dell laptop could be work)

the cc analysis are below

123.JPG

0 Likes
1 Solution

Hello,

Please add higher source PDOs on the CCG4 side. For example 9V / 3A and 12V / 3A.

Which SDK version and firmware are you using?

Best Regards,

Yatheesh

View solution in original post

0 Likes
5 Replies
YatheeshD_36
Moderator
Moderator
Moderator
750 replies posted 500 replies posted 250 solutions authored

Hello,

Can you please confirm if the CCG is initiating the PR_Swap and sending PS_RDY to the PC and are you using an EMCA cable?

And can you please share the logs where the Power role swap was successful(with DELL Laptop).

Best Regards,

Yatheesh

0 Likes
lock attach
Attachments are accessible only for community members.

Hi Yatheesh,

  I didn't use EMCA cable, juest normal typeC cable.

below is dell laptop charge

0 Likes

Hello,

Seems like the CCG is not responding with a PS_RDY after acknowledging the PS_RDY sent by the laptop. Please use EMCA cable and try the same.

Please connect the CCG to the laptop without powering the CCG externally and check if there is reset of CCG when it initiates a PR_SWAP.

Best Regards,

Yatheesh

0 Likes

Hi Yatheesh,

Why I can PR_SWAP success in DELL laptop, but in MacBook, it's not success.

in my design, I have to supply power to PD through external power and do not use EMCA cable.

What caused the problem when CCG reset after PR_SWAP

0 Likes

Hello,

Please add higher source PDOs on the CCG4 side. For example 9V / 3A and 12V / 3A.

Which SDK version and firmware are you using?

Best Regards,

Yatheesh

0 Likes