Exactly questions as below:
1. In WICED, is the function of blecm_setTxPowerInADV() used to set the RF Power ?
2. What type of this function parameter, db? the parameter unit is db ?
3. When to call this function? before ADV start or after ?
I have also tried moderating the advertising power by using this method and found that it had no effect as measured by scope showing current draw during advertising events.
With the above thread, and the thread referenced by Boont's reply above, that makes at least three users who have demonstrated that the function does not work as advertised. Can we get some developers to concur on this, and commit to fixing it, or else provide instructions on how to control advertising power? Because the function provided has no effect on advertising power.
We are trying hard to extend battery life and we have no need to advertise 30 meters away. Our device pairing takes place at very close proximity and excessive advertising power only wastes precious energy.
We study the thread U recommand, and we have succeed to set the TX power lower than default.