- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I have a quick question: Does anyone know if enabling SFLASH encryption disables the serial port input?
When I add SECURE_SFLASH=1 into the make command, then it appears that the serial port outputs data, but no longer accepts input from the console.
Solved! Go to Solution.
- Labels:
-
ispn:38946:1:0
-
l1:314:1:0
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Thank you for the suggestion. I tried it out and saw that it was not an SDK issue because the console app worked fine when encrypted.
I did some digging and found that the problem was the way my UART RX routine was coded. When I reverted back to wiced_uart_receive_bytes(), it worked fine with secure SFLASH enabled. Case closed!
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
hello:
did you try the command console app for the input test ? and disable all the flow control flag like RTS/CTS .
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Thank you for the suggestion. I tried it out and saw that it was not an SDK issue because the console app worked fine when encrypted.
I did some digging and found that the problem was the way my UART RX routine was coded. When I reverted back to wiced_uart_receive_bytes(), it worked fine with secure SFLASH enabled. Case closed!
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
thanks for the share..