- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello.
I found the solder mask guide and smt guide of soic(S25FS512SDSMFB010).
Do you have them?
Thanks and Best regards.
Glenn.
Solved! Go to Solution.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi Glenn,
Sincere apologies for the delay in my response. I was discussing your query internally. Please find the response of our experts below -
We normally provide SMT guidelines but do not provide details such as amount of solder paste. This is because the dispense of the paste, volume etc. will depend upon customer process and target paste manufacturer recommendations.It is recommended that you reach out to paste manufacturer with the stencil design and get their recommendation.
The paste mask (or stencil) opening can be the same size as PCB pad size, as shown in Figure 32 in the App. Note. The mask (or stencil) thickness, we use 5 mil thickness for our SMT for BLR test, without any problem.
Best Regards,
Apurva
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello.
I am sorry.
I need the metal mask guide.
Thanks and Best regards.
Glenn.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi Glenn,
Thank you for contacting Cypress Semiconductor.
We need some clarification in order for us to provide an accurate response.
- metal mask guide – is it mask guide for Silicon?
- smt guide – are you referring to Land pattern?
Best Regards,
Apurva
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello Apurva.
I am sorry late.
I saw the PCB design guide, but, I can't find it.
Thanks and Best regards.
Glenn.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi Glenn,
I am not clear about your previous response. You had requested for the metal mask guide and smt guide in the original query. Right?
Quality team needs clarification regarding the original request.
1. By metal mask guide, do you mean mask guide for silicon?
2. By smt guide, are you referring to land pattern?
Regards,
Apurva
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello Apurva.
I mean the paste mask that it masks the solder paste for the SMT.
Thanks and Best regards.
Glenn.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi Glenn,
Please go through this application note - https://www.cypress.com/file/217366/download
Hope this answers your query.
Best Regards,
Apurva
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello Apurva
Do you mean "At center slug, the stencil should also has small multiple openings with solder paste coverage about 40 – 70% of the exposed pad area to prevent bridging between the center slug and pins." ?
Thanks and Best regards.
Glenn.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi Glenn,
Could you please clarify your question? Are you looking for an explanation for the sentence in the quotes?
Best Regards,
Apurva
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello Apurva.
I am sorry.
I am poor to use english.
They wish to know amount How much the solder paste.
For applying it, they need the figures how wide the space of the paste mask is.
Thanks and Best regards.
Glenn.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi Glenn,
Sincere apologies for the delay in my response. I was discussing your query internally. Please find the response of our experts below -
We normally provide SMT guidelines but do not provide details such as amount of solder paste. This is because the dispense of the paste, volume etc. will depend upon customer process and target paste manufacturer recommendations.It is recommended that you reach out to paste manufacturer with the stencil design and get their recommendation.
The paste mask (or stencil) opening can be the same size as PCB pad size, as shown in Figure 32 in the App. Note. The mask (or stencil) thickness, we use 5 mil thickness for our SMT for BLR test, without any problem.
Best Regards,
Apurva
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello Apurva.
Thanks.
Have a nice day.
Glenn.