- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Dear Expert,
I have a question about Programmer.
As I know I can program CCG3PA through Miniprog3 that support SWD. I know that ST link also support SWD, so can I program CCG3PA using ST link of ST.
I apologize to you if the question is so silly but that's what I want to know.
If you have any suitable knowledge, please share with me.
Thank you so much
Solved! Go to Solution.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi ,
Since CCG3PA support SWD programming, you can read the SWD programming SPEC to check if ST link of ST can support the SPEC or not. Typically, a standard MCU can support this SWD programming SPEC, you can refer Application notes: .https://www.cypress.com/file/140961/download
Best Regards,
Lisa
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi ,
Since CCG3PA support SWD programming, you can read the SWD programming SPEC to check if ST link of ST can support the SPEC or not. Typically, a standard MCU can support this SWD programming SPEC, you can refer Application notes: .https://www.cypress.com/file/140961/download
Best Regards,
Lisa