- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi:
as we know, when we process the interrupt routin ,the mcu should enter the critical section,if there is any API to make the mcu to enter the critical section and exit the critical section on the CYW20735B1 platform !
thanks!
mandy
Solved! Go to Solution.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
The CYW20735B1 device uses a event callback system which is different from a interrupt system. There is no API for the critical section enter and exit.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
The CYW20735B1 device uses a event callback system which is different from a interrupt system. There is no API for the critical section enter and exit.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
HI OwenZ_26:
thank you for your reply.
if so . there seems to be a question that when the MCU is going on an important task for example the NVram write operation.
however at this time, a event callback is triggered. if the NVram operation will fail.
how can I avoid such things!
thanks!
mandy
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
The priority for different thread is predefined and the device will avoid that scenario. Customer doesn't need to worry about it.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi OwenZ_26:
OK , I have gotten what you said. thank you for your patient reply !