- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
We are using device: S70GL02GS in our design and need software to read ECC status code from specified pages on memory. Please redirect us to the existing driver code to do so.
Flash memory memory mapped to this address = 0x40000000
Solved! Go to Solution.
- Labels:
-
Parallel NOR
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi Amit,
Thank you for contacting Cypress Semiconductor.
You can download our low level driver for parallel NOR flash from here - https://www.cypress.com/documentation/software-and-drivers/low-level-driver-nor-flash?source=search&...
Please note that S70GL02GS is a dual die stack of two S29GL01GS chips. Hence, the MSB bit of address should be taken care of for accessing the correct die. Please go through this Application Note for more information - Accessing the Second Die in S70GL02GS – KBA219687
Please let me know if you have any further queries.
Best Regards,
Apurva
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi Amit,
Thank you for contacting Cypress Semiconductor.
You can download our low level driver for parallel NOR flash from here - https://www.cypress.com/documentation/software-and-drivers/low-level-driver-nor-flash?source=search&...
Please note that S70GL02GS is a dual die stack of two S29GL01GS chips. Hence, the MSB bit of address should be taken care of for accessing the correct die. Please go through this Application Note for more information - Accessing the Second Die in S70GL02GS – KBA219687
Please let me know if you have any further queries.
Best Regards,
Apurva