- It seems that you using OpenOCD for denugging. Please Confirm.
- Can you share the prints from other console (Refer attachment)
- Are you following all the steps mentioned in the user guide that you pointed to in the post? Please confirm.
- If you are using OpenOCD what is the version? 0.8.0 version is recommended
If using Segger J Link Install latest J Link GDB Server software
debugg.png 22.6 K
1 of 1 people found this helpful
I tried to reproduce the problem at my end. (refer attachment).
To solve this issue you need to follow the steps from software setup (page: 36) of the document you mentioned in your post.
The configuration file arm926ejs_FX3.cfg need to be added.
The document you are referring is not the latest version.
Note: The path to directories will differ if you are using the newer SDK with this document
You can refer to Section 3.2 of EzUsbSuite_UG - Debugging with OpenOCD in the newer version of SDK 1.3.4 https://www.cypress.com/documentation/software-and-drivers/ez-usb-fx3-software-development-kit