- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
We are considering CYPD3175.
We would like to confirm for the firmware update operation using the CC line.
So trying to connect with power board of CCG3PA EVK.
A board with CYPD3175 is used instead of the main board of CCG3PA EVK.
However, the firmware cannot be updated normally.
The data sheet includes the following.
CYPD3171-24LQXQ : Power Bank : UFP CC Bootloader
CYPD3175-24LQXQ : Power Adapter based on Direct Feedback : DFP CC with Direct Feedback Bootloader
We think the above differences are influencing.
Do we need to set anything on the power board of CCG3PA EVK?
Regards,
Solved! Go to Solution.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
Have you updated the firmware of CCG4 to MTK?
C:\Program Files (x86)\Cypress\EZ-PD Configuration Utility\Firmware\MTK
Regards,
Eddie
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
Have you updated the firmware of CCG4 to MTK?
C:\Program Files (x86)\Cypress\EZ-PD Configuration Utility\Firmware\MTK
Regards,
Eddie