note show

Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
lock attach
Attachments are accessible only for community members.
deda_294911
Level 4
Level 4
Welcome!

hi everybody,

for the first time i am writing program on CY8C4A45AZI-483.

program gets build with no error on psoc creator 4.2 but showing adc compatibility note. files attached.

i reinstall creator with updatation of analog co processor component. due to note i am unable to proceed.

please help.

0 Likes
1 Solution

Hi,

There is no incompatibility. The Note in notice list is wrong, and does not impact any part of the design or build.  The workaround is to ignore the notice for now.

This note will not appear in next version of Creator.

Thanks,

Ankita

View solution in original post

0 Likes
18 Replies
Vasanth
Moderator
Moderator
Moderator
250 sign-ins 500 solutions authored First question asked

Hello Deepak,

Could you please go to tools and press Find new components. Please install the new components and let me know if this solves the problem.

Best Regards,
Vasanth

0 Likes

problem remains same. this problem(note) also shown on cypress example

program for analog coproc.

On Fri, Aug 16, 2019 at 11:32 AM VasanthR_91 <community-manager@cypress.com>

0 Likes

Hi Deepak,

Please ensure that there is no space in  the path of Cypress Code example created in your system.

Thanks,

Ankita

0 Likes

dear ankita,

I didn't understand what space you are saying? That note is comming to my

as well as cypress eg. Project.

On Fri, Aug 16, 2019, 18:06 AnkitaS_51 <community-manager@cypress.com>

0 Likes
MotooTanaka
Level 9
Level 9
Distributor - Marubun (Japan)
First comment on blog Beta tester First comment on KBA

Hi,

I think Ankita-san is saying that there is a space ' ' letter between "sameer" and "acoproc"

in the path name of your project in the file system.

In the title bar it reads

C:..\...\sameer acoproc\Workspace19\Design01.cydsn\...

So how about make it to

sameer_acoproc or SammerAcproc ?

Although it's odd, with a project who's location (path name) contains space or non standard ascii letter tends to have problem with compiling.

moto

0 Likes
AnkitaS_51
Employee
Employee
100 likes received 50 likes received 25 likes received

Hi,

Can you go to your Tools>Find new components  and check whether You can get option to install from Web This ADC(UAB) component.

Can you remove this space in the Path of project "sameer acoproc", then close and reopen the project in Creator 4.2 and further then check with build.

Can you share your project so that we can try to reproduce the issue.

Thanks,

Ankita

0 Likes
NaDo_1344206
Level 1
Level 1
Welcome!

Hi All,

I had also tried to build this code and found attached 1 warning and 2 Notes after updating all components.

Need help to solve this issues.

Thanks,

Nainesh.Analog Co-processor build note.pngAnalog Co-processor build note 1.pngAnalog Co-processor build note 2.png

0 Likes

Hi,

Please share the project here, so that I can also reproduce the issue.

Thanks,

Ankita

0 Likes

dear ankita,

please create any new project with analog coprocessor with creator 4.1,

4.2. select any UAB component viz. adc. the same message will appear. also

for scanning sar_adc v 3.10 same problem.

thanks,

On Tue, Aug 20, 2019 at 9:52 AM AnkitaS_51 <community-manager@cypress.com>

0 Likes
lock attach
Attachments are accessible only for community members.

Hi Ankita,

Find attached latest updated project which still showing same issues.

Best Regards,

Nainesh Doshi.

0 Likes

Hi Ankita,

Do you have any update on this. ?

I had shared UAB based ADC project for CY8C4A45AZI-483 in my last response here.

Help to resolve issue quickly.

Best Regards,

Nainesh Doshi.

0 Likes
lock attach
Attachments are accessible only for community members.
MotooTanaka
Level 9
Level 9
Distributor - Marubun (Japan)
First comment on blog Beta tester First comment on KBA

Dear Nainesh-san,

Although this may not be the answer you wanted, I tried following.

(1) I downloaded and opened your design

000-Startup.JPG

(2) I updated components from menu

001-update_component.JPG

(3)  Still I could not requicken Prog_Vref .

And when I tried to open the Web Page of the component I got 404 error.

002-Find-New-Component.JPG

(4) So I decided to use Vref component.

And set the type to "System wide reference"

004-schematic.JPG

(5) As you seemed to want to use Band Gap, I confirmed that the Design Wide Voltage Reference is BandGap (1.2V)

003-System-Wide-Voltage-Reference.JPG

(6) Then I could build the project.

I wish this could be a workaround for you.

Best Regards,

24-Aug-2019

Motoo Tanaka

0 Likes

nothing happens. either chip is not supporting uab or my creator. i hold

design for clearence for production. i wish to switchover from cy8c28452 to

analog co proc. if unable then renesas is good choice for me.

thanks,

On Sat, Aug 24, 2019 at 10:53 AM Motoo Tanaka <community-manager@cypress.com>

0 Likes
MotooTanaka
Level 9
Level 9
Distributor - Marubun (Japan)
First comment on blog Beta tester First comment on KBA

Oh, I'm very sorry for hearing that.

I could not test it as I don't have the board with the device,

so all I could was confirm that the project was compile-able.

Anyway I respect your decision.

moto

0 Likes

Hi,

There is no incompatibility. The Note in notice list is wrong, and does not impact any part of the design or build.  The workaround is to ignore the notice for now.

This note will not appear in next version of Creator.

Thanks,

Ankita

0 Likes

dear ankita,

shall i proceed with my design for production.

thanks,

On Mon, Aug 26, 2019 at 3:31 PM AnkitaS_51 <community-manager@cypress.com>

0 Likes

Hi Deepak,

The note in question does not impact any part of the design or build, this information I have got internally.

If that note was kind of roadblock for not going to production, then you can now proceed .

Thanks,

Ankita

0 Likes

thanks a lot ankita and our team.

On Tue, Aug 27, 2019 at 8:58 AM AnkitaS_51 <community-manager@cypress.com>

0 Likes