- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
I am new to PSOC creator. Wondering where this is part is located or how I can get it on my TopDesign. See attached.
Solved! Go to Solution.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
This is a "Digital Input Pin" component.
The component looks like following image when put on the schematic at first.
When you configure the component with the Component Configuration Tool, the shape will be changed.
For example when the "interrupt" is set to "Rising Edge" and the "Dedicated interrupt" is checked,
The Pin component would have an irq output as follows.
Please refer the component datasheet which can be invoked by the "Open Datasheet" context menu item
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
This is a "Digital Input Pin" component.
The component looks like following image when put on the schematic at first.
When you configure the component with the Component Configuration Tool, the shape will be changed.
For example when the "interrupt" is set to "Rising Edge" and the "Dedicated interrupt" is checked,
The Pin component would have an irq output as follows.
Please refer the component datasheet which can be invoked by the "Open Datasheet" context menu item