- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello,
I have been having trouble getting connected to the CySmart app with my ISM43340_M4G_L44 with WICED Studio 6.2.1. I have a demo board along with a board that I have spun, and both of them exhibit the same behavior. I can see the device advertising as HELLO and attempt to connect in the CySmart app. When I select the device, it hangs and disconnects. I was able to get the serial printout:
Platform ISM43340_M4G_L44 initialised
Started ThreadX v5.8
Hello Sensor Start
00:00:00.006000 GKI_create_task func=0x8014721 id=1 name=BTU stack=0x0 stackSize=4096
00:00:00.015000 GKI_create_task func=0x8015f11 id=0 name=HCISU stack=0x0 stackSize=3072
hello_sensor_management_callback: 15
hello_sensor_management_callback: 0
hello_sensor_application_init
wiced_bt_gatt_register: 0
wiced_bt_gatt_db_init 0
wiced_bt_cfg_settings.device_name:HELLO
wiced_bt_ble_set_advertisement_data 0
hello_sensor_management_callback: 17
Advertisement State Change: 3
wiced_bt_start_advertisements 0
hello_sensor_management_callback: 21
**TRYING TO CONNECT HERE**
hello_sensor_conn_up id:2
:hello_sensor_management_callback: 17
Advertisement State Change: 0
ADV stop
Stopping Advertisements0
connection_down conn_id:2 reason:62
hello_sensor_management_callback: 17
Advertisement State Change: 4
wiced_bt_start_advertisements 0
hello_sensor_conn_up id:2
:hello_sensor_management_callback: 17
Advertisement State Change: 0
ADV stop
Stopping Advertisements0
hello_sensor_management_callback: 21
connection_down conn_id:2 reason:8
hello_sensor_management_callback: 17
Advertisement State Change: 4
wiced_bt_start_advertisements 0
hello_sensor_management_callback: 21
hello_sensor_conn_up id:2
:hello_sensor_management_callback: 17
Advertisement State Change: 0
ADV stop
Stopping Advertisements0
connection_down conn_id:2 reason:8
hello_sensor_management_callback: 17
Advertisement State Change: 4
wiced_bt_start_advertisements 0
hello_sensor_management_callback: 21
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi ,
Not sure what is the issue.
Which chip are you using? Are you using EVAL board or custom PCB?
Are you testing default hello_sensor project in WICED or modified one to work with sensor? In that case, please share the project which you are testing.
Thanks,
Anjana
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi, thanks for the response.
I am using the Inventek ISM43340-M4G-L44 using both the eval board and a custom board. They both have the same behavior. The project I am working with is the default ble_hello_sensor project. The only thing I did different was add ISM43340-M4G-L44 to the VALID_PLATFORMS list so it would build.
-Bryce