- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I have a PSOC 5LP (cy8ckit-059) development board and I was wondering how would I go about setting the serial number for the board ?
Solved! Go to Solution.
- Labels:
-
PSoC 5LP
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello Randy Seedle,
- In case you are using the Cypress' USB-Serial part, the serial number can be updated using the Cypress USB-Serial Configuration Utility.
- In case you are using the Cypress peripheral controllers, please refer to the below documents for using a serial number.
Configuring the USB serial number in EZ-USB (AN21xx/FX/FX1/FX2/FX2LP)
Distinguishing Different FX3 Devices with Same VID/PID on Host Application – KBA225775
Best regards,
Srinath S
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
There is a unique id in the PSoC chip. You can retrieve it using CyGetUniqueID(uint32* uniqueId). See System Reference Guide (from Creator Help menu).
Bob
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Ok, so here is the deal. When I change the PID to the value "3", the previous value for the serial number is now zero. Upon checking the values in in USBview I now see two Cypress products. One is the development board and the other is presumably the debugger. The old serial number goes with the debugger. I wanted the development board to have a serial number so that I could work in an environment with multiple copies of the Cypress development board with different serial numbers. That is why I wanted to change the serial number. If the development boards serial numbers are all zero, it won't help. Any ideas ?
Randy Seedle
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello Randy Seedle,
- In case you are using the Cypress' USB-Serial part, the serial number can be updated using the Cypress USB-Serial Configuration Utility.
- In case you are using the Cypress peripheral controllers, please refer to the below documents for using a serial number.
Configuring the USB serial number in EZ-USB (AN21xx/FX/FX1/FX2/FX2LP)
Distinguishing Different FX3 Devices with Same VID/PID on Host Application – KBA225775
Best regards,
Srinath S
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
What include file is associated with CyGetUniqueID() function ?
Randy Seedle
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Typo in Cypress documents the name is CyGetUniqueId() (small letter "d").
Bob