- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I am using the pioneer kit CY8CKIT_062 with WiFi-BT.
When I compile and flash the kit using WICED, I get the following error
Building apps lookup table
Downloading Bootloader ...
"**** OpenOCD failed - ensure you have installed the driver from the drivers directory, and that the debugger is not running **** In Linux this may be due to USB access permissions. In a virtual machine it may be due to USB passthrough settings. Check in the task list that another OpenOCD process is not running. Check that you have the correct target and JTAG device plugged in. ****"
Downloading DCT ...
"**** OpenOCD failed - ensure you have installed the driver from the drivers directory, and that the debugger is not running **** In Linux this may be due to USB access permissions. In a virtual machine it may be due to USB passthrough settings. Check in the task list that another OpenOCD process is not running. Check that you have the correct target and JTAG device plugged in. ****"
Downloading resources filesystem ... build/demo.aws.iot.pub_sub.publisher-CY8CKIT_062/filesystem.bin at sector 1 size 97...
tools/makefiles/wiced_apps.mk:334: recipe for target 'FILESYSTEM_IMAGE_DOWNLOAD' failed
- make.exe[1]: *** [FILESYSTEM_IMAGE_DOWNLOAD] Error 1
- make.exe[1]: *** Waiting for unfinished jobs....
Makefile:351: recipe for target 'main_app' failed
make: *** [main_app] Error 2
10:59:23 Build Finished (took 20s.89ms)
The content of the openOCD.log file is
Open On-Chip Debugger 0.10.0+dev-00227-g0d15c62 (2018-03-27-15:19)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "swd". To override use 'transport select <transport>'.
adapter speed: 1000 kHz
cortex_m reset_config sysresetreq
cortex_m reset_config vectreset
post_init_psoc6_setup
Error: CMSIS-DAP: SWD not supported
I am using Programmer 3.28.4. A snapshot of what programmer shows is attached
Solved! Go to Solution.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
The firmware version required for CMSIS-DAP is 1.10.
Info : CMSIS-DAP: FW Version = 1.10
It can be found from openocd_log.txt file in build folder.
Kindly update the DAPLink Firmware and to update the firmware, please refer the below KitProg3 user guide link :
https://www.cypress.com/file/452701/download
Thanks.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
Could you please provide the screenshot of your device manager window?
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
Could you please try to change the mode of SW4 switch and update us.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
before pressing SW4, the state of the LEDs are as follows:
LED2 Blinking yellow
LED3 off
LED1 off
LED4 solid yellow
When I press SW4
LED2 Blinking Yellow
LED3 Solid Green
LED1 Solid Red
LED4 Off
WHen I compile and download, I get
Building apps lookup table
Downloading Bootloader ...
"**** OpenOCD failed - ensure you have installed the driver from the drivers directory, and that the debugger is not running **** In Linux this may be due to USB access permissions. In a virtual machine it may be due to USB passthrough settings. Check in the task list that another OpenOCD process is not running. Check that you have the correct target and JTAG device plugged in. ****"
Downloading DCT ...
"**** OpenOCD failed - ensure you have installed the driver from the drivers directory, and that the debugger is not running **** In Linux this may be due to USB access permissions. In a virtual machine it may be due to USB passthrough settings. Check in the task list that another OpenOCD process is not running. Check that you have the correct target and JTAG device plugged in. ****"
Downloading resources filesystem ... build/demo.aws.iot.pub_sub.publisher-CY8CKIT_062/filesystem.bin at sector 1 size 97...
tools/makefiles/wiced_apps.mk:334: recipe for target 'FILESYSTEM_IMAGE_DOWNLOAD' failed
make.exe[1]: *** [FILESYSTEM_IMAGE_DOWNLOAD] Error 1
make.exe[1]: *** Waiting for unfinished jobs....
Makefile:351: recipe for target 'main_app' failed
make: *** [main_app] Error 2
08:41:30 Build Finished (took 19s.35ms)
the content of the openocd_log.txt is
Open On-Chip Debugger 0.10.0+dev-00227-g0d15c62 (2018-03-27-15:19)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "swd". To override use 'transport select <transport>'.
adapter speed: 1000 kHz
cortex_m reset_config sysresetreq
cortex_m reset_config vectreset
post_init_psoc6_setup
Error: unable to find CMSIS-DAP device
Thank you for your help
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
The firmware version required for CMSIS-DAP is 1.10.
Info : CMSIS-DAP: FW Version = 1.10
It can be found from openocd_log.txt file in build folder.
Kindly update the DAPLink Firmware and to update the firmware, please refer the below KitProg3 user guide link :
https://www.cypress.com/file/452701/download
Thanks.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I try to use the programmer to upgrade the firmware, but I remain on the same version of the firmware.
Would you kindly provide specific instructions.
Shukri
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I upgraded using the command below fw-loader.exe –update-kp3, but programmer wants me to revert. See programmer’s output below
C:\Users\sabdalla\ModusToolbox_1.1\tools\fw-loader-2.1\bin>fw-loader.exe --update-kp3
Cypress Firmware Updater, Version: 2.1.0.52
(C) Copyright 2018-2019 by Cypress Semiconductor
All Rights Reserved
Info: Start API initialization
Info: Connected - KitProg3 CMSIS-DAP HID-04170E6C03227400
Info: Hardware initialization complete (633 ms)
Device 'KitProg3 CMSIS-DAP HID-04170E6C03227400' opened successfully
Info: Kit FW is 'KitProg3' ver. 1.01 b158. Upgrade file is 'KitProg3' ver. 1.10 b2946. Upgrade file contains a Custom App.
Info: Disconnected - KitProg3 CMSIS-DAP HID-04170E6C03227400
Info: Connected - KitProg Bootloader-04170E6C03227400
Info: Bootloader Version: Major 1, Minor 1, Build 40
Info: FW Upgrade to version: 1.10 b2946. Upgrade of Custom App
Info: Bootloading of Custom App...
Info: Verifying of Custom App...
Info: Bootloading of KitProg FW...
Info: Verifying of KitProg FW...
Info: Upgrade completed
Info: Disconnected - KitProg Bootloader-04170E6C03227400
Info: Connected - KitProg3 CMSIS-DAP HID-04170E6C03227400
FW update completed successfully
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
Can you please try now programming through Wiced by using SW4 switch in DAP link mode and let us know if downloading the resource file system is happening or not.
Thanks.