- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
I'd like to go further with this previous discussion : is there a way to process automatically, ie in program or scripts rather than with "manual" operations ?
Thank you for your help,
Best Regards
usb driver installation and updation issue
Hello Chandran,
- Right click on the device in the device manager and select 'Update Driver Software'.
- Choose 'Browse my computer for driver software'.
- Choose 'Let me pick from a list of device drivers on my computer'. Click on 'Next'.
- Choose 'Have Disk'. Click on 'Next'.
- Browse to the following directory.
C:\Program Files (x86)\Cypress\EZ-USB FX3 SDK\1.3\driver\bin\<OS>\<Architecture>
and point to the cyusb3.inf file.
This directory will be present if the FX3 SDK is installed. Please refer to the below link for the same.
http://www.cypress.com/documentation/software-and-drivers/ez-usb-fx3-software-development-kit
- Choose the model name and click on 'Next'.
- If the PC prompts for a restart, choose 'No' and reset the device.
Best regards,
Srinath S
Voir la répoSolved! Go to Solution.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello,
Please find the attached driver package that comes with a script file. To install the CYUSB3 driver on any of the OS contained in the driver package, run the DriverInstaller.bat file.
NOTE: Please do not modify the names of the folders used in the package as these are used in the DriverInstaller.bat file.
Password for the zip file: cypress
Best regards,
Srinath S
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello,
Please find the attached driver package that comes with a script file. To install the CYUSB3 driver on any of the OS contained in the driver package, run the DriverInstaller.bat file.
NOTE: Please do not modify the names of the folders used in the package as these are used in the DriverInstaller.bat file.
Password for the zip file: cypress
Best regards,
Srinath S
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi
thank you for your reactivity !
I test it right now.
Best Regards,