- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
We started developing Capacitive Fingerprint sensor module with CY8C4127LQI-BL483 chip, we have ADH make Capacitive FPsensor HF108 & supporting source code (mostly for LPC / STM MCU) and which is bit messed non documented, inteface is via SPI , i am not a professional developer so need help in converting the code to above chip, attaching the HF108 datasheet
Solved! Go to Solution.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi SaBh_1180281,
Thank you for your interest with Cypress products.
We recommend you to refer to our code example to develop an SPI interface between PSoC 4 Master and slave module.
https://www.cypress.com/documentation/code-examples/ce224339-psoc-4-spi-master
Please use our community in case you need further support with respect to your code.
Regards,
Bragadeesh
Bragadeesh
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi SaBh_1180281,
Thank you for your interest with Cypress products.
We recommend you to refer to our code example to develop an SPI interface between PSoC 4 Master and slave module.
https://www.cypress.com/documentation/code-examples/ce224339-psoc-4-spi-master
Please use our community in case you need further support with respect to your code.
Regards,
Bragadeesh
Bragadeesh