the fx3_dir discussion in the slave fifo example

Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
keyu_4225841
Level 1
Level 1

在学习SDK1.3的slave fifo的实例过程中发现一个问题,请帮忙解释一下,谢谢:

FX3是通过GFII连到FPGA的,这个SLAVE 的读和写都是FPGA自动产生的,USB HOST即PC端如果想要读FPGA这边的数据,在这个SLAVE FIFO的实例中是没有这条路的,我是不是应该在FX3连到FPGA的连线上,加一个自定义的GPIO,用来从上位机即PC USB上发送一个读或写的指令到FX3,FX3收到这个指令后将这个GPIO置高或置低,来通知FPGA上位机是需要开始读还是写?请帮忙指教,谢谢

0 Likes
1 Solution
YangyangC_06
Employee
Employee
750 replies posted 500 replies posted 250 replies posted

怎么叫没有这条路?PC端请求的数据就是从FPGA端写入到FX3的buffer里去的。

View solution in original post

0 Likes
1 Reply
YangyangC_06
Employee
Employee
750 replies posted 500 replies posted 250 replies posted

怎么叫没有这条路?PC端请求的数据就是从FPGA端写入到FX3的buffer里去的。

0 Likes