- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
I am getting the following error whenver i am trying to use interface stlink.... Please help
Licensed under GNU GPL v2
Downloading Bootloader ...
For bug reports, read
http://openocd.sourceforge.net/doc/doxygen/bugs.html
Error: The specified debug interface was not found (stlink)
The following debug interfaces are available:
1: parport
2: dummy
3: ft2232
4: ft2232_swd
5: usb_blaster
6: amt_jtagaccel
7: gw16012
8: presto
9: usbprog
10: jlink
11: vsllink
12: rlink
13: arm-jtag-ew
Runtime Error: .//tools/OpenOCD/stlink.cfg:30:
in procedure 'script'
at file "embedded:startup.tcl", line 58
in procedure 'interface' called at file ".//tools/OpenOCD/stlink.cfg", line 30
tools/makefiles/standard_platform_targets.mk:44: recipe for target 'download_bootloader' failed
make.exe[1]: *** [download_bootloader] Error 1
make.exe[1]: *** Waiting for unfinished jobs....
Makefile:185: recipe for target 'main_app' failed
make: *** [main_app] Error 2
Solved! Go to Solution.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
OpenOCD embedded in SDK not support stlink-v2 before SDK 3.3.1
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
So it is possibke to use ST-link on 3.3.1?
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
yes