Build console is not producing correct count for flash memory map

Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
lock attach
Attachments are accessible only for community members.
agmi_3321141
Level 4
Level 4
5 likes given First like received First like given

Hi!

My build console is not producing the correct map for flash memory (please see attached log). The map csv file in the build folder has blank contents under "memory area" for all flash contents. This ends up making the flash column count zero in the console.From the "address" column I know it is going to internal flash. Any ideas on fixing this?

0 Likes
1 Solution
lock attach
Attachments are accessible only for community members.

Can you replace the map_parse_gcc.pl file attached with this mail in your WICED and try the build?

Also please let me know your WICED version.

View solution in original post

4 Replies
PriyaM_16
Moderator
Moderator
Moderator
250 replies posted 100 replies posted 50 replies posted

Hello,

Can you please mention the platform and attach the platfrom makefiles for reference?

0 Likes

I observe this behavior for other platform builds on the IDE too, so I am not sure if it is platform dependent? For example one of the default on the IDE is - "snip.scan-BCM943362WCD4-FreeRTOS-LwIP-SDIO". also gives me a similar build map.

0 Likes
lock attach
Attachments are accessible only for community members.

Can you replace the map_parse_gcc.pl file attached with this mail in your WICED and try the build?

Also please let me know your WICED version.

Thanks for the updated perl script. I can see the map on the console now.

My WICED version is: "Wiced_006.001.000.0085"

0 Likes