Only valid bit field and registers are applicable in the device.
Please check these bit field/registers in
MBR3 Registers TRM
And for verification, please check only valid bit fields/registers.
(i.e. you can ignore "N/A".)
Sorry for my lack of explanation
My concern is about this documentation.
4.5 Step 3 – Program Flash
4.6 Step 4 – Verify Flash
These sample program access to all address using " *.H " file.
is it correct?
I don't still understand your concern and why you are worried.
The register address and data has been specified in hex file.
The data can be modified, but you create CRC accordingly while flashing the device.
could you please refer to the section 5.2.4 of https://www.cypress.com/file/46366/download and explain more detail of your concerns?