- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello,
We are considering DC/DC(switching) power supply for BLE module(CYBLE-222014-01).
Does the switching frequency of the power supply affect the performance of the BLE module?
If there is a performance impact, which switching frequency should I choose?(500kHz, 1MHz, 4MHz...)
Thanks,
Shimamura
Solved! Go to Solution.
- Labels:
-
BLE
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Generally, it should be considered to use switching DC/DC, especially for switching frequency.
it would affect to noise on power line and also the performance as total system.
so, it shall be recommended to use Linear regulator, instead of switching regulator.
Just for your reference:
AN88619 - PSOC 4 HARDWARE DESIGN CONSIDERATIONS
AN2155 - PSoCR EMI Design Considerations
AN80994 - Design Considerations for Electrical Fast Transient (EFT) Immunity
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Generally, it should be considered to use switching DC/DC, especially for switching frequency.
it would affect to noise on power line and also the performance as total system.
so, it shall be recommended to use Linear regulator, instead of switching regulator.
Just for your reference:
AN88619 - PSOC 4 HARDWARE DESIGN CONSIDERATIONS
AN2155 - PSoCR EMI Design Considerations
AN80994 - Design Considerations for Electrical Fast Transient (EFT) Immunity