- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
We have our custom boards with Linux 3.14 that use Murata SN8000(CYW43362) and 1DX (CYW4343W) Wi-Fi module. We are in the middle to upgrade our drivers with the 2019-05-08 Cypress FMAC packages.
The readme file in the package states the following are the supported features.
Supported Features
-----------------
* Concurrent APSTA
* P2P
* Out-of-band (OOB) interrupt
* CLM download (43455/4343w/4354/4356/43012/89342/89359/4373)
* Wake on Wireless LAN
* Voice enterprise (43455)
* PMF
* WPA3 (43455)
* RSDB (89342/89359)
* Thermal throttling (4343w)
* Fast roaming (89342)
Is PMF (802.11w) feature supported by both CYW43362 and CYW4343W? So far I cannot get our CYW43362 device to connect to PMF enabled AP.
Is Fast roaming (802.11r) only supported by 89342? Not for CYW43362 and CYW4343W?
Thanks,
Solved! Go to Solution.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
PMF is only supported in the newer chips . 43362 doesn't support PMF.
And as for fast roaming, it is supported in 4343w.
Could you do
strings <firmware.bin> |grep fbt
if present in the ouput, then fast roaming is enabled in the firmware that you are using.
Regards,
Vinayak
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
PMF is only supported in the newer chips . 43362 doesn't support PMF.
And as for fast roaming, it is supported in 4343w.
Could you do
strings <firmware.bin> |grep fbt
if present in the ouput, then fast roaming is enabled in the firmware that you are using.
Regards,
Vinayak