- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I have two CYW943907AEVAL1F eval boards connected to the same Linux PC. With one eval. board connected, the default ports are /dev/ttyUSB0 and /dev/ttyUSB1.
With two boards, I see an additional two ports: /dev/ttyUSB2 and /dev/ttyUSB3 (good!). In fact, I can connect my serial port program to USB0 and USB2 and see the console port of each individual board.
Does anyone know if there a way to force the Eclipse IDE to connect to one board or the other for code download purposes? For the life of me, I can't seem to find any settings to make this possible...
Thanks!
Solved! Go to Solution.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello,
Unfortunately there is no way to program both the boards together.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello,
Unfortunately there is no way to program both the boards together.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Thank you for the update! Case closed.