using jlink to debug the sn8200

Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
Anonymous
Not applicable

hi,

I'm new here and would appreciate some good advice on how to download and debug the FW on sn8200.

from reading the forum i have learned the following steps are needed:

build using BCM943362WCD2-debug download JTAG=jlink

so far I always get the **** OpenOCD failed - ...

jlink is installed correctly and works fine in IAR.

Thanks
Martin

0 Likes
1 Solution
Anonymous
Not applicable

The WICED-SDK does not come with the platform files for the Murata SN8200.

Murata should be able to provide you with the appropriate platform files. I believe you can send your queries to modules@murata.com.

View solution in original post

0 Likes
2 Replies
Anonymous
Not applicable

The WICED-SDK does not come with the platform files for the Murata SN8200.

Murata should be able to provide you with the appropriate platform files. I believe you can send your queries to modules@murata.com.

0 Likes
Anonymous
Not applicable

Hi,

There is a patch file available on the Murata portal for the SN8200.  Please register with your EVK registration code at www.murata-ws.com.

Thank you, Paul

0 Likes