- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I was trying to reproduce example given in 002-23400_AN223400_Getting_Started_with_EZ-BT_WICED_Modules.pdf with WICED 6.2 and
CYBT-413034-EVAL, but 3 of the steps on page 21/22 are not applicable as the mentioned code is missing with what is actually provided with WICED studio 6.2:
There is no wiced_bt_app_init(); in hello_sensor_application_init() so cant make:
Comment out wiced_bt_app_init(); as required on page 21/22
There is no :
// wiced_hal_gpio_configure_pin( WICED_GPIO_BUTTON, WICED_GPIO_BUTTON_SETTINGS(
GPIO_EN_INT_RISING_EDGE ), WICED_GPIO_BUTTON_DEFAULT_STATE );
// wiced_hal_gpio_register_pin_for_interrupt( WICED_GPIO_BUTTON, hello_sensor_interrupt_handler,
NULL );
to comment out as required on page 22
instead I commented:
in hello_sensor.c:hello_sensor_application_init
// wiced_platform_register_button_callback( WICED_PLATFORM_BUTTON_1, hello_sensor_interrupt_handler, NULL, WICED_PLATFORM_BUTTON_RISING_EDGE);
But this probably is not enough as the result is not quite perfect - the app stalls if from the Android Client try to connect SPP mode, disconnect, then BLE or vise versa
Solved! Go to Solution.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi rfq1_1917156,
wiced_bt_app_init() function is not there in hello_sensor.c for CYBT-413043; this comment should be there for CYBT-343026.
// wiced_hal_gpio_configure_pin( WICED_GPIO_BUTTON, WICED_GPIO_BUTTON_SETTINGS(
GPIO_EN_INT_RISING_EDGE ), WICED_GPIO_BUTTON_DEFAULT_STATE );
// wiced_hal_gpio_register_pin_for_interrupt( WICED_GPIO_BUTTON, hello_sensor_interrupt_handler,
NULL );
This section is in hello_sensor.c for CYBT-343026, it is not there for CYBT-413043. This is mentioned on page 22.
Thanks for pointing out.! I will accelerate this to team internally.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi rfq1_1917156,
wiced_bt_app_init() function is not there in hello_sensor.c for CYBT-413043; this comment should be there for CYBT-343026.
// wiced_hal_gpio_configure_pin( WICED_GPIO_BUTTON, WICED_GPIO_BUTTON_SETTINGS(
GPIO_EN_INT_RISING_EDGE ), WICED_GPIO_BUTTON_DEFAULT_STATE );
// wiced_hal_gpio_register_pin_for_interrupt( WICED_GPIO_BUTTON, hello_sensor_interrupt_handler,
NULL );
This section is in hello_sensor.c for CYBT-343026, it is not there for CYBT-413043. This is mentioned on page 22.
Thanks for pointing out.! I will accelerate this to team internally.