- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
hi,
I'm new here and would appreciate some good advice on how to download and debug the FW on sn8200.
from reading the forum i have learned the following steps are needed:
build using BCM943362WCD2-debug download JTAG=jlink
so far I always get the **** OpenOCD failed - ...
jlink is installed correctly and works fine in IAR.
Thanks
Martin
Solved! Go to Solution.
- Labels:
-
Debug
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
The WICED-SDK does not come with the platform files for the Murata SN8200.
Murata should be able to provide you with the appropriate platform files. I believe you can send your queries to modules@murata.com.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
The WICED-SDK does not come with the platform files for the Murata SN8200.
Murata should be able to provide you with the appropriate platform files. I believe you can send your queries to modules@murata.com.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
There is a patch file available on the Murata portal for the SN8200. Please register with your EVK registration code at www.murata-ws.com.
Thank you, Paul