- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Dear Sir,
Can Cypress provide a authorized , stable version for CX3? I download several demo codes from cypress , As0260, Ov5640 and balabala..., and I also create a new project in EZsuite which can generate all necessary .c file automatically, you only need customize sensor init file.
There are so many different source code between them,specifically in USBEventCB(), although all of them can show image video, but it seems there are more different stability.
Please see one section code from AS0260 code. as same in DEMO code which EZsuite generate.
/* This is the Callback function to handle the USB Events */
static void
CyCx3UvcAppUSBEventCB (
CyU3PUsbEventType_t evtype, /* Event type */
uint16_t evdata /* Event data */
)
{
uint8_t interface = 0, altSetting = 0;
switch (evtype)
{
case CY_U3P_USB_EVENT_SUSPEND:
/* Suspend the device with Wake On Bus Activity set */
glIsStreamingStarted = CyFalse;
CyU3PEventSet (&glCx3Event, CX3_USB_SUSP_EVENT_FLAG, CYU3P_EVENT_OR);
break;
case CY_U3P_USB_EVENT_SETINTF:
/* Start the video streamer application if the
* interface requested was 1. If not, stop the
* streamer. */
interface = CY_U3P_GET_MSB(evdata);
altSetting = CY_U3P_GET_LSB(evdata);
/* Make sure that the endpoint toggles/sequence numbers are cleared. */
glIsClearFeature = CyTrue;
#if CX3_DEBUG_ENABLED
CyU3PDebugPrint(4,"\n\rUsbCB: IF = %d, ALT = %d", interface, altSetting);
#endif
glIsStreamingStarted = CyFalse;
if ((altSetting == CX3_UVC_STREAM_INTERFACE) && (interface == 1))
{
/* Stop the application before re-starting. */
if (glIsApplnActive)
{
#if CX3_DEBUG_ENABLED
CyU3PDebugPrint (4, "\n\rUsbCB:Call AppStop");
#endif
CyCx3UvcAppStop ();
}
CyCx3UvcAppStart ();
break;
}
//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
An other version, CyCx3UvcAppStart () is in the bracket pair, in fact, it is more stable than DEMO code.
if (glIsApplnActive)
{
#if CX3_DEBUG_ENABLED
CyU3PDebugPrint (4, "\n\rUsbCB:Call AppStop");
#endif
CyCx3UvcAppStop ();
CyCx3UvcAppStart ();
}
break;
}
I am very confused that which version is more stable. so Can cypress provide an authorized, proven stable version of CX3 platform?
Thanks.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello,
Please let me know what is the operating system (Windows / Linux / Mac) that you are using?
Can you please explain what is the fucntionality difference that you have seen with the above two variants of the code? i.e What is the unstability that you observed the first one?