- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I am writing an BLE mcu-to -mcu project, the module is CYBLE-222014
I want to develop an OTA function that BLE deviceA receive update-firmware from PC through UART,
then deviceA send the firmware file to BLE deviceB via BLE and complete the OTA procedure.
The question is, I cannot find any information about the host device in mcu-base device. (I know there are source code of andriod and IOS )
All document is about deviceB, the one which updated firmware.
I wonder if there is any example or any resources for the host device of OTA?
Solved! Go to Solution.
- Labels:
-
BLE
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
We have embedded bootloader host examples for UART and I2C based bootloading. Please checkout following ANs to understand embedded bootloader host.
https://www.cypress.com/documentation/application-notes/an86526-psoc-4-i2c-bootloader
https://www.cypress.com/documentation/application-notes/an60317-psoc-3-and-psoc-5lp-i2c-bootloader
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
We have embedded bootloader host examples for UART and I2C based bootloading. Please checkout following ANs to understand embedded bootloader host.
https://www.cypress.com/documentation/application-notes/an86526-psoc-4-i2c-bootloader
https://www.cypress.com/documentation/application-notes/an60317-psoc-3-and-psoc-5lp-i2c-bootloader