How do I correctly wire a 6.144 MHz clock signal to a GPIO pin.

Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
safc_4162461
Level 1
Level 1

I have a 6.144 MHz clock, but when I wire it to a digital output pin PSOC Creator gives me a invalid connection error. Why and how do I fix this issue.

0 Likes
1 Solution
lock attach
Attachments are accessible only for community members.

samfitzsim64,

Attached is project demo using a pin as output clock on PSoC4200. You don't have to install the library component, just copy pin setting.

/odissey1

pastedImage_0.png

View solution in original post

3 Replies
Vison_Zhang
Moderator
Moderator
Moderator
First comment on KBA 750 replies posted 250 sign-ins

That depends on which silicon you used, could you provide the specific part number of silicon and which pin you want to route clock out? 

In addition, which block generated this 6.144MHz clock, PWM?

0 Likes

I am using the CY8C4245AXI-483

0 Likes
lock attach
Attachments are accessible only for community members.

samfitzsim64,

Attached is project demo using a pin as output clock on PSoC4200. You don't have to install the library component, just copy pin setting.

/odissey1

pastedImage_0.png