- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
MiniProg3 is working with the PSoC Programmer. MiniProg4 communicates with the PSoC Programmer in almost exactly the same way with one exception. The Voltage Setting, however, is grayed out. With MiniProg3 my target powered, but with MiniProg4 my target does not get powered. The Target Power status LED doe not light on MiniProg4. It would seem by the grayed out control and this LED not lighting, my PSoC Programmer/MiniProg4 is not delivering target power. Does anyone know how to change this?
Installed CyInstaller Products:
Bridge Control Panel 1.18.0.3121
Clock Programmer 1.8.0.3121
Device Database 3121
Example Code 3121
PSoC Programmer 3.27.1.3121
USB Bootloader Application 3121
CY4541 CCG4 Daughter Card
Solved! Go to Solution.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Please use MiniProg4 with latest PSoC Programmer 3.28.1 or Cypress Programmer depending on the device.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Please use MiniProg4 with latest PSoC Programmer 3.28.1 or Cypress Programmer depending on the device.