- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
is it possible to read the actual counter values of DATA_COUNT, ADDR_COUNT and CTRL_COUNT registers?
Thanks in advance.
Joe
Solved! Go to Solution.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello Joe,
- The current value of the counter cannot be obtained in the firmware. Instead, an event can be generated when the counter limit value is being hit.
- The counter values can be initialized in the firmware using the CyU3PGpifInitDataCounter(), CyU3PGpifInitAddrCounter() and CyU3PGpifInitCtrlCounter() APIs. These APIs perform the same functions as the counter initialization in the state machine.
Best regards,
Srinath S
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello Joe,
- The current value of the counter cannot be obtained in the firmware. Instead, an event can be generated when the counter limit value is being hit.
- The counter values can be initialized in the firmware using the CyU3PGpifInitDataCounter(), CyU3PGpifInitAddrCounter() and CyU3PGpifInitCtrlCounter() APIs. These APIs perform the same functions as the counter initialization in the state machine.
Best regards,
Srinath S