CySmart with PSoc6 BLE Send Indication

Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
DiBa_944911
Level 1
Level 1
Welcome! First question asked First reply posted

The "Indicate" button of the CySmart iOS application sends 0x01 instead of 0x02 to activate the indications of a service.

Indicate.jpg

0 Likes
1 Solution

I'd like to know if the indication is enabled effectively in your test scenario?

Not sure whether the value written to device is "01 00" as well as displayed on GUI. Anyway, it should be a bug of IOS CySmart app.

View solution in original post

0 Likes
7 Replies
ShipingW_81
Moderator
Moderator
Moderator
500 replies posted 250 solutions authored 250 replies posted

It looks the input value "01 00" in above capture is for Notification enable. For Indication enable, you should input “02 00”.

0 Likes

Yes, but the application writes 01 00 when the button "indicate" is pressed instead of 02 00 ...

0 Likes

Which version of the CySmart you are using? I checked on my side it looks the written values for Notification are correct.

IMG_1345.PNGIMG_1344.PNG

0 Likes

Strange, it's the same

iphone.jpg

0 Likes

Indicate and Notify disabled :

IMG_5388.png

Notify enabled : ok ! "01 00"

IMG_5390.png

Indicate enabled : No ok !!! "01 00" instead of "02 00"

IMG_5389.png

0 Likes

I'd like to know if the indication is enabled effectively in your test scenario?

Not sure whether the value written to device is "01 00" as well as displayed on GUI. Anyway, it should be a bug of IOS CySmart app.

0 Likes

I also think that this is a bug in the CySmart iOS app.

0 Likes