3D Shutter glasses cypress bluetooth

[NiKu_4114656]

Hello, we need solution for bluetooth 3D glass in our projects.

for both sides (Host side and glass side)

I found cypress application note AN214771.

I guess use CYW920719Q40EVB-01 or  CYW920819EVB-02 for host side

and CYW920735Q60EVB-01 for glass side.

Is it ok, or need I use CYW20702 as described in AN?

Could you please suggest another better chip or EVB for my application?

Do you have example projects for host and glass side?

[Murali_R]

Hello,

You should be able to use either the CYW920719Q40EVB-01 or  CYW920819EVB-02 for the host side and the CYW920735Q60EVB-01 for glass side as all these chips support Bluetooth as mentioned in the hardware requirements of the Application Note and these boards should serve your application purpose.

We do not have any example projects for the 3D host and glass side.

[NiKu_4114656]

Dear MuraliR_36,

thank you very much for fast reply.

Does Cypress Bluetooth classic stack (for both sides host and peripheral) support 3D Synchronization Profile or it should be written from scratch according to specification?

[Murali_R · Accepted solution]

Hello kuznetsovn_4114656​

The Cypress Bluetooth Classic stack doesn't support 3D Synchronization profile.

It needs to be written from scratch.