How to use jtag segger to program external SPI flash?

Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
gean_3054931
Level 5
Level 5
10 likes given 5 likes given First like received

Hello,

we are using fx3 device(cyusb3035) with jtag segger.we are able to use jtag segger with fx3 but we need to program spi flash that is connected to fx3 device through jtag segger?how can i achieve this?

thank you

geetha.

0 Likes
1 Solution
abhinavg_21
Moderator
Moderator
Moderator
50 likes received 25 likes received 10 likes received

Hi Geetha,

To program the SPI flash first of all SPI read/write firmware has to be loaded on to the FX3 chip which will program the external SPI flash. It is not possible to do it via JTAG. JTAG is mainly provided for debugging purposes.

Thanks & Regards

Abhinav

View solution in original post

0 Likes
1 Reply
abhinavg_21
Moderator
Moderator
Moderator
50 likes received 25 likes received 10 likes received

Hi Geetha,

To program the SPI flash first of all SPI read/write firmware has to be loaded on to the FX3 chip which will program the external SPI flash. It is not possible to do it via JTAG. JTAG is mainly provided for debugging purposes.

Thanks & Regards

Abhinav

0 Likes