- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
We have the Patron Raid1 board we're demoing with and require some assistance from a software engineer with experience with the FX3S. We're really struggling with the [lack of] documentation and are struggling to get any of the test programs to function on the board.
Initial requirement is to assist with the modifications required for card-to-card transfers.
Anyone interested to discuss?
Best regards,
Josh
Solved! Go to Solution.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello Josh,
Please refer to the application note on the FX3S Raid-1 firmware. The SD-Card to SD-Card transfers are triggered when one of the cards is removed and re-inserted. Kindly, let know the issues that you are facing while performing this.
Best regards,
Srinath S
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello Josh,
Please refer to the application note on the FX3S Raid-1 firmware. The SD-Card to SD-Card transfers are triggered when one of the cards is removed and re-inserted. Kindly, let know the issues that you are facing while performing this.
Best regards,
Srinath S
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi Srinath,
Thank you for your reply, I believe we have looked over all the documentation and are still unable to get it to play ball. I'll drop you a direct message to better explain the situation!
Best regards
Josh