- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
The USB3 hub CYUSB330x requires 3.3V analog power supply. In the DVK external power supply is used to derive these voltages. How can i design self-powered USB3 hub that uses VBUS only?
Solved! Go to Solution.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
Please confirm if you want a bus powered hub design which uses VBUS for supply? You can directly use VBUS with a 3.3V regulator instead of deriving 5V (VCC_5V) from an external power supply. When the hub is bus-powered in the DVK as well, VBUS is connected to VCC_5V which provides 3.3V and 1.2V.
Best Regards,
Sananya
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
Please confirm if you want a bus powered hub design which uses VBUS for supply? You can directly use VBUS with a 3.3V regulator instead of deriving 5V (VCC_5V) from an external power supply. When the hub is bus-powered in the DVK as well, VBUS is connected to VCC_5V which provides 3.3V and 1.2V.
Best Regards,
Sananya