CY2304SXI

Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
kaquc_2151576
Level 1
Level 1

Hi Cypress,

We used CY7B991V-5JXI before, the aurora eye open, everything worked fine, but CY7B991V-5JXI doesn’t support TTL input, so we changed to CY2304SXI-2 because it supports TTL input, but the aurora eye close, everything else worked fine. so base on the datasheet, CY2304SXI-2 has more jitters than CY2304SXI-1, so we changed to CY2304SXI-1, the aurora eye still close, everything else worked fine. we measured the pin 7 of CY2304SXI-1, the VDD got some ripples, we don’t know if it is the ripples cause the aurora eye close, so could you guys provide the requirement implementation for the CY2304SXI-1? Especially, how should we implement the power filter for the VDD of CY2304SXI-1?

Aurora Eye

Other functions

Input support

CY7B991V-5JX

Open

Work

LVTTL

CY2304SXI-2

Close

Work

TTL

CY2304SXI-1

Close

Work

TTL

0 Likes
1 Solution
PradiptaB_11
Moderator
Moderator
Moderator
500 replies posted 250 solutions authored 250 replies posted

Hi,

The PLL outputs are affected in both amplitude and phase offset if there is any noise in the power supply. That can be the reason you are not seeing a satisfactory eye diagram. Usually ferrite beads are used for power supply filtering. Can you try placing  a ferrite bead that suits your specifications and check if the issue persist.

Thanks,

Pradipta.

View solution in original post

0 Likes
1 Reply
PradiptaB_11
Moderator
Moderator
Moderator
500 replies posted 250 solutions authored 250 replies posted

Hi,

The PLL outputs are affected in both amplitude and phase offset if there is any noise in the power supply. That can be the reason you are not seeing a satisfactory eye diagram. Usually ferrite beads are used for power supply filtering. Can you try placing  a ferrite bead that suits your specifications and check if the issue persist.

Thanks,

Pradipta.

0 Likes