FX3 type-c Receptacle design

Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
UnHa_3846631
Level 1
Level 1

Hi all,

I have a question about the FX3 type-c Receptacle design below.

First, I want to get 5V / 3A via a USB C-type cable (Host: PC)

I know that the current that can be supplied according to the CC line is decided in the USB C-type application.

If I connect CC1 / CC2 with 5.1k pull-down as shown in figure 2 without separate CC controller, I want to check if there is no problem in receiving 3A.

pastedImage_0.png

With best regards

  

Ham

0 Likes
1 Solution
YiZ_31
Moderator
Moderator
Moderator
1000 replies posted 750 replies posted 500 replies posted

Hi,

According to Type-C specification, Type-C port supports transmitting up to 5 V, 3 A of power through VBUS with out power delivery. So there won't be problems in receiving 3A current.

Regards,

Eddie.

View solution in original post

0 Likes
1 Reply
YiZ_31
Moderator
Moderator
Moderator
1000 replies posted 750 replies posted 500 replies posted

Hi,

According to Type-C specification, Type-C port supports transmitting up to 5 V, 3 A of power through VBUS with out power delivery. So there won't be problems in receiving 3A current.

Regards,

Eddie.

0 Likes