- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
I'm just got the FX3 SUPERSPEED EXPLORER KIT. Now to test the board I followed the instruction on the "Getting_Started_with_EZ-USB_FX3". However when i try to build any of the exisiting Firmaware Project i get the Error: "
Description Resource Path Location Type
cs-make: *** [cyfx_gcc_startup.o] Error 1 USBBulkLoopAuto C/C++ Problem
"
The console logs are
"
14:26:22 **** Incremental Build of configuration Debug for project USBBulkLoopAuto ****
cs-make all
'Building file: ../cyfx_gcc_startup.S'
'Invoking: Cross ARM GNU Assembler'
arm-none-eabi-gcc -mcpu=arm926ej-s -marm -mthumb-interwork -O0 -fmessage-length=0 -fsigned-char -ffunction-sections -fdata-sections -Wall -g3 -x assembler-with-cpp -I"C:\Program Files (x86)\Cypress\EZ-USB FX3 SDK\1.3\/fw_lib/1_3_4/inc" -MMD -MP -MF"cyfx_gcc_startup.d" -MT"cyfx_gcc_startup.o" -c -o "cyfx_gcc_startup.o" "../cyfx_gcc_startup.S"
The current directory is invalid.
cs-make: *** [cyfx_gcc_startup.o] Error 1
14:26:25 Build Finished (took 2s.775ms)
"
I installed both EZ-USB FX3 SDK 1.3.3 and Superspeed Explorer Kit Rev (both with the complete setting chosen) but it doesn't work.
Could you please help to solve my problem ?
EDIT:
I found the Problem.
For everyone who has the same Problem. When you import the Project you have to select in the menu to copy the Project into workspace.
Solved! Go to Solution.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi Matthias,
You have two solutions.
- Install FX3 SDK v1.3.4 and rebuild this project.
- Change the value of FX3SDKVERSION from 1_3_4 to 1_3_3. Then rebuild this project without installing SDK v1.3.4
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi Matthias,
Please install FX3 SDK 1.3.4 instead of FX3 SDK 1.3.3 from the following path:
https://www.cypress.com/documentation/software-and-drivers/ez-usb-fx3-software-development-kit
Thanks & Regards
Abhinav Garg
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi Matthias,
You have two solutions.
- Install FX3 SDK v1.3.4 and rebuild this project.
- Change the value of FX3SDKVERSION from 1_3_4 to 1_3_3. Then rebuild this project without installing SDK v1.3.4