hi ,
sometime, when I create a timer event by wiced_rtos_register_timed_event() function,an error appear in the openocd_log.txt file. but I delete the timer event ,the error disappear. Which reasons could cause this problem ?? in SDK 3.1.2, platform BCM9WCDUSI09
Info : only one transport option; autoselect 'jtag'
trst_and_srst separate srst_gates_jtag trst_push_pull srst_open_drain connect_deassert_srst
adapter speed: 1000 kHz
adapter_nsrst_delay: 100
jtag_ntrst_delay: 100
Warn : target name is deprecated use: 'cortex_m'
jtag_init
Info : J-Link initialization started / target CPU reset initiated
Info : J-Link V9 compiled Oct 28 2014 19:25:34
Info : J-Link caps 0xb9ff7bbf
Info : J-Link hw version 90000
Info : J-Link hw type J-Link
Info : J-Link max mem block 71184
Info : J-Link configuration
Info : USB-Address: 0x0
Info : Kickstart power on JTAG-pin 19: 0xffffffff
Info : Vref = 3.304 TCK = 1 TDI = 0 TDO = 0 TMS = 0 SRST = 0 TRST = 0
Info : J-Link JTAG Interface ready
Info : clock speed 1000 kHz
Polling target stm32f2xxx.cpu failed, GDB will be halted. Polling again in 100ms
Info : JTAG tap: stm32f2xxx.cpu tap/device found: 0x4ba00477 (mfg: 0x23b, part: 0xba00, ver: 0x4)
Info : JTAG tap: stm32f2xxx.bs tap/device found: 0x06411041 (mfg: 0x020, part: 0x6411, ver: 0x0)
Info : Selecting JTAG transport command set.
Info : AP INIT COMPLETE
Info : stm32f2xxx.cpu: hardware has 6 breakpoints, 4 watchpoints
Info : JTAG tap: stm32f2xxx.cpu tap/device found: 0x4ba00477 (mfg: 0x23b, part: 0xba00, ver: 0x4)
Info : JTAG tap: stm32f2xxx.bs tap/device found: 0x06411041 (mfg: 0x020, part: 0x6411, ver: 0x0)
Info : Selecting JTAG transport command set.
Info : AP INIT COMPLETE
Polling target stm32f2xxx.cpu succeeded again
Info : Selecting JTAG transport command set.
Info : AP INIT COMPLETE
Info : accepting 'gdb' connection from 3333
Info : device id = 0x20036411
Info : flash size = 1024kbytes
Warn : acknowledgment received, but no packet pending
Info : Auto-detected RTOS: ThreadX
Error: address + size wrapped(0xfffffffe, 0x00000004)
Error: address + size wrapped(0xfffffffe, 0x00000004)
Warn : stepi ignored. GDB will now fetch the register state from the target.
Error: address + size wrapped(0xfffffffe, 0x00000004)
Error: address + size wrapped(0xfffffffe, 0x00000004)
Error: Not implemented: target_get_gdb_fileio_info_default
Error: address + size wrapped(0xfffffffe, 0x00000004)
Error: address + size wrapped(0xfffffffe, 0x00000004)
Error: Not implemented: target_get_gdb_fileio_info_default
Error: address + size wrapped(0xfffffffe, 0x00000004)
Error: address + size wrapped(0xfffffffe, 0x00000004)
Error: address + size wrapped(0xfffffffe, 0x00000004)
Error: address + size wrapped(0xfffffffe, 0x00000004)
Error: address + size wrapped(0xfffffffe, 0x00000004)
Error: address + size wrapped(0xfffffffe, 0x00000004)
Error: address + size wrapped(0xfffffffe, 0x00000004)
Error: address + size wrapped(0xfffffffe, 0x00000004)
