- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi Guys,
I have downloaded the S25FL128S VHDL model (from http://www.cypress.com/simulation-models), added to my project in Xilinx Vivado and tried to synthesize but got the following error message:"ERROR: [Synth 8-26] block statement with generics or ports not implemented".
It seems that Vivado can't synthesize the "Main Behavior Block" that has a port and port map inside.
I have searched everywhere but couldn't find much information about the Block statement and what I am doing wrong.
For VitalBuf and VitalWireDelay I got the following message: "WARNING: [Synth 8-312] ignoring unsynthesizable construct: non-synthesizable procedure call". In Vivado it also seems that these are not being found for some reason:
Could you please give some advice on that?
Thanks in advance,
Leonardo.
Solved! Go to Solution.
- Labels:
-
Serial NOR
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi Leonardo,
This model is designed to be used only for simulations. They are not synthesizable.
Thanks and Regards,
Sudheesh
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi Leonardo,
This model is designed to be used only for simulations. They are not synthesizable.
Thanks and Regards,
Sudheesh