- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Starting Stage USB Detecting on Device Manager
Select the *.hex File
After Flash the .hex File USB Device not Detecting
Solved! Go to Solution.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello,
Please share the firmware source of the generated HEX file. If it is confidential, please share the descriptor file.
EDIT:
- Please check if the configuration descriptor data is correct in terms of the descriptor length, endpoint configurations.
- Capture the USB trace during the device enumeration to identify the point of issue.
- Ensure that the device hardware is fine and is in accordance with the AN15456.
Best regards,
Srinath S
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello,
Please share the firmware source of the generated HEX file. If it is confidential, please share the descriptor file.
EDIT:
- Please check if the configuration descriptor data is correct in terms of the descriptor length, endpoint configurations.
- Capture the USB trace during the device enumeration to identify the point of issue.
- Ensure that the device hardware is fine and is in accordance with the AN15456.
Best regards,
Srinath S